Short answer: most SCR complaints on Euro V and Euro VI Sinotruk trucks come from three things — diesel exhaust fluid that is not 32.5 % urea, a dosing nozzle that has crystallised or is not sealing, and a downstream NOx sensor reporting the result of those two. The sensor is frequently replaced first and is frequently not the fault. Check the fluid, then the nozzle, then the sensor.
When the system derates the engine, drivers describe it as “loss of power” and the workshop sees a NOx efficiency code. The code tells you the system failed its own self-check; it does not tell you where.
Diesel exhaust fluid is a controlled product: 32.5 % urea in deionised water. Anything else changes the chemistry the catalyst was designed for.
| What you observe | Most likely cause | Confirmation |
|---|---|---|
| Derate with NOx efficiency code | Fluid quality, nozzle, sensor | Refractometer first, then nozzle inspection |
| High DEF consumption | Over-dosing from a wrong upstream sensor | Compare commanded dose against sensor readings |
| No DEF consumption at all | Dosing inhibited, blocked line or pump | Command a test dose and observe the nozzle |
| White deposits in the pipe | Poor spray, leaking nozzle, low exhaust temperature | Inspect the nozzle and the mixer |
| Fault only in freezing weather | Purge or heating fault | Check purge cycle and heater circuit |
| Ammonia smell at idle | Over-dosing or a leaking nozzle | Dose test and nozzle seal check |
| Item | Action | Prevent repeat failure |
|---|---|---|
| Contaminated fluid | Drain, flush with deionised water, refill with certified DEF | Fix the buying source, use a refractometer at each delivery |
| Crystallised nozzle | Clean or replace, verify spray pattern | Confirm the purge cycle works |
| Failed pump | Replace, then run a full dose and purge test | Check for contamination that killed the old pump |
| Aged sensor | Replace and clear adaptations | Verify the dosing path first so the new sensor is not blamed for an old fault |
| Deposits in the mixer | Clean or replace | Correct spray and temperature are the only real prevention |
Emission control configuration differs between Euro V and Euro VI builds. Confirm component part numbers and test procedures against the OEM documentation for your chassis.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








