Short answer: heavy steering on a HOWO T7H is a hydraulic or a mechanical problem, and the two are easy to separate with one question: is it heavy all the time, or only when hot or only at one lock? Heavy everywhere from cold points at pump output, belt slip or a blocked filter. Heavy only when the oil is hot points at pump wear or internal leakage in the steering gear. Heavy at one lock points at a mechanical bind — a ball joint, a kingpin or a bent linkage — and no amount of hydraulic pressure will fix it.
The T7H uses an engine-driven power steering pump feeding an integral steering gear. Because the pump is belt-driven and the oil also cools the pump, a tired belt or a restricted filter can imitate a failing gear almost perfectly. Pressure-testing the pump output takes ten minutes and prevents the most expensive mistake in this diagnosis: replacing a steering gear because the pump was weak.
Tee a pressure gauge into the pump delivery line and read it in three states: at idle with the wheels straight, at idle with the steering held just short of full lock, and at raised engine speed. Then compare with the figures in the manual.
| Oil appearance | What it means | Action |
|---|---|---|
| Clear amber, at level | System healthy | Continue normal service interval |
| Dark brown, smells burnt | Overheated by full-lock holds or a restricted return | Flush the system, replace the filter, find the restriction |
| Milky or foamy | Air being drawn in on the suction side | Pressure-test the suction line, check the reservoir seal |
| Metallic sparkle | Pump or gear wearing out | Flush, replace the filter, re-test pressure before replacing parts |
Excessive toe-in or toe-out, a bent tie rod from a kerb strike, or a worn kingpin all raise steering effort and all produce a distinct tyre wear pattern. If the front tyres show feathered edges across the tread, or one shoulder scrubbed compared with the other, the alignment is doing the damage regardless of what the pump is delivering. Correct the geometry first — measuring toe with a tape and a chalk line on a level surface is enough to show a fault — and then re-assess the effort.
Steering pressure figures, relief settings and alignment values are build-specific. Confirm them in the OEM workshop manual for your chassis before adjusting or replacing hydraulic components.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








