Short answer: coolant on a Sinotruk is a specification, not a colour. An OAT coolant protects the liners from cavitation and the aluminium from corrosion for a long service life, and topping it up with a different chemistry can turn the whole charge into a gel that blocks the radiator. Before adding anything, identify what is in the system, check the concentration with a refractometer rather than by eye, and never mix two coolant types to save a drum.
Coolant has four jobs: raise the boiling point, lower the freezing point, prevent corrosion and suppress cavitation on the wet liners. Cavitation is the one people forget — the liner vibrates against the coolant and implodes vapour bubbles on its surface, and over time that erodes the liner wall through into the combustion chamber. The correct chemistry prevents it; water alone does not, and a wrong coolant can make it worse.
| Check | Correct state | If wrong |
|---|---|---|
| Freezing point | Matched to the coldest expected temperature for the operating region | Adjust concentration; too strong also reduces heat transfer |
| Chemistry | One type, as specified for the engine | Drain and refill; do not blend |
| Condition | Clear, no sediment, no oil film | Find the source: oil cooler, head gasket or corrosion |
| Level | At the mark when cold | Find the leak before topping up repeatedly |
| Pressure cap | Holds specified pressure | Replace; a weak cap lowers the boiling point |
Wet liners move under combustion pressure, and that movement produces tiny vapour bubbles on the coolant side that collapse and erode the metal. The right coolant contains the correct inhibitor to form a protective layer, and it maintains that layer only while the concentration and chemistry are correct. This is the reason a truck that has run on plain water for a season can develop a liner pinhole that looks like a mystery failure: the cause was the coolant for the whole season, and the failure appeared later.
Coolant chemistry, concentration and service intervals are engine-specific. Confirm them in the OEM manual, and collect and dispose of used coolant properly.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








