banner-news1
REPAIR FAQ
Back

Sinotruk Cooling System Scale: Flushing the Block Correctly

Short answer: Scale and corrosion sit in the block, the head and the oil cooler, not in the radiator. A truck that runs hot on one cylinder or loses heat output from the cab heater is usually carrying deposits in the water jacket that no radiator flush will reach. The repair is a proper chemical clean of the whole circuit, and it has to be done before the scale becomes a cracked head.

Coolant that has never been changed, or that has been topped up for years with hard water, deposits mineral scale on the hottest surfaces in the jacket. Those surfaces are around the liners and the exhaust side of the head, which is exactly where heat has to be removed fastest.

The symptom is not a general overheating. It is one cylinder running hotter than its neighbours, a heater that blows cold, and a radiator that feels cold at the bottom while the top is hot.

QUICK DIAGNOSIS — scale or air?
  1. 1Top hose hot, bottom hose cold, heater cold — Restricted flow through the block or a stuck thermostat. Check both.
  2. 2One exhaust port consistently hotter at the same load — Local deposit in that water passage or a partly blocked liner passage.
  3. 3Radiator cold while the engine is hot — Air lock or a blocked radiator core, not scale in the block.
  4. 4Coolant brown or rusty with sediment in the reservoir — Corrosion products circulating. Clean the whole circuit, not just the radiator.
Truck mechanic draining rusty coolant from the radiator and block of a Sinotruk diesel engine

What comes out at the drain tells you the state of the circuit. Rust and sediment mean the whole system needs cleaning.

1. Prove it is flow before you clean

Before any chemical goes in, confirm the thermostat opens, the water pump is circulating and the radiator is not air locked. A stuck thermostat produces the same top-hot bottom-cold pattern as scale, and it costs a fraction of the flush to test.

Check the heater core circuit as well. On many trucks the heater is fed from a branch that blocks first, so a cold cab heater is an early warning of a restricted jacket rather than a heater fault.

  1. Run the engine with the cap off and watch for a steady flow at the radiator neck when the thermostat opens. No flow means pump or thermostat, not scale.
  2. Measure the temperature drop across the radiator with an infrared thermometer. A small drop with a hot engine points at restricted flow, not at a cold radiator.
  3. Compare exhaust port temperatures per cylinder at the same load. One hot port is a local restriction.
  4. Drain a litre from the block drain, not the radiator drain, and look at it. Block drain shows what the jacket is carrying.

2. Cleaning the circuit properly

A correct clean is done in this order: drain the whole circuit including the block and the oil cooler, flush with clean water, add the specified cleaner at the specified temperature and time, drain, neutralise if the product requires it, then refill with the correct coolant mix. Skipping the neutralise step leaves an acidic residue that attacks the new coolant and the seals.

Change the thermostat and the coolant filter, if fitted, after the clean. A filter that has collected the released deposits will block within a few hundred kilometres.

Symptom Location Fix
One hot cylinder, others normal Block water passage Chemical clean, verify flow
Cold cab heater, hot engine Heater branch or core Back-flush the branch
Radiator cold at the bottom Core blocked or air lock Back-flush core, bleed the system
Sediment in the reservoir Whole circuit Full clean and new coolant
Coolant passage inside a diesel engine block showing scale and corrosion deposits after draining

Deposits form where the metal is hottest. Cleaning the radiator leaves all of this in place.

3. What not to do

Do not use household descaler or acid on an aluminium radiator or an aluminium head. The acid removes the oxide layer that protects the aluminium and the radiator will start leaking within weeks.

Do not run a cleaning agent and then leave it in the system. Every product has a contact time, and exceeding it attacks seals and hoses.

Never open a hot pressurised system to add cleaner. Boiling coolant releases the moment the cap turns, and it releases towards your hands and face.
Thermostat and coolant filter removed from a truck engine beside a new thermostat ready to fit

Thermostat and filter go in new after a clean. Both collect what the cleaner released.

Questions drivers ask most

How often should coolant be changed?
At the interval in the maintenance schedule for your coolant type, and immediately after any contamination, oil ingress or repeated top-ups with hard water.
Can scale cause a head gasket failure?
Yes. Local hot spots from restricted flow distort the deck and crack the head. Cleaning is cheaper than a head job.
Is a coolant filter worth fitting?
On a truck doing high mileage with mixed coolant sources, yes. It collects the corrosion products that would otherwise settle in the jacket.
Does a radiator flush product work?
Only on the radiator. Deposits in the block need a circulation clean with the thermostat open and the pump running.
Need thermostats, water pumps, coolant filters or hoses for your Sinotruk? Send the model and engine number and we will confirm the parts. Send your request

Cleaner type, contact time and coolant specification are engine specific. Follow the OEM manual and the product instructions.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4