Short answer: A hub reduction axle carries a planetary gear set in each wheel hub, which means each wheel end has its own oil level and its own bearings. Oil moves between the hub and the axle through a transfer path, and when that path is blocked or the hub is filled to the wrong level, the planetary set runs dry while the differential still shows a healthy level.
The failure mode is quiet: the hub gears and bearings wear without any warning until a wheel end becomes noisy or a bearing collapses.
Checking the hub level at every service is the whole prevention, and it takes a few minutes per wheel.
Each hub has a level plug at a defined position. Remove it and confirm oil is at the plug with the wheel in the correct rotational position. A dry hub with a full differential is the classic sign of a blocked transfer path.
Then check the hub magnetic plug. A little fine fuzz is normal; flakes or a metallic paste mean the bearing or planetary set is failing.
With the hub removed, inspect the planetary gears, the sun gear and the bearings. Wear shows as pitting on the gear teeth and discolouration on the bearing races.
End play and preload are set with shims and must be measured. A hub that is set too tight runs hot, and one set too loose produces noise and seal leaks.
| Finding | Meaning | Action |
|---|---|---|
| Hub dry, axle full | Transfer path blocked | Clear the path, refill |
| Metal flakes at hub plug | Bearing or gear wear | Overhaul the wheel end |
| Hub hot after a run | Preload or oil level | Re-set and refill |
| Oil at hub seal only | Overfilled hub or worn seal | Correct level, replace seal |
At every service: check the hub level, check the magnetic plug, and confirm the transfer path is open. At every oil change: use the correct oil for the hub and the axle, and do not substitute a single grade for both unless the manual allows it.
After an overhaul, run the truck loaded and check hub temperature by hand or with an infrared thermometer. A wheel end that is noticeably hotter than its neighbour has a problem.
Oil grades, levels and preload values are axle specific. Confirm them in the OEM manual.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








