banner-news1
REPAIR FAQ
Back

Sinotruk Steering Pump Pressure: Measuring Before Replacing

Short answer: The steering pump is replaced on suspicion far more often than on evidence. Heavy steering at idle, or steering that is heavy only when the engine is hot, can come from the pump, the steering box, a restricted hose or a relief valve that opens early. A pressure test with a gauge and a flow check separates them, and it takes less time than fitting a pump.

Two numbers matter: the maximum pressure the pump can build and the flow it delivers at idle. A pump can pass a pressure test and still be weak on flow, which shows as heavy steering at low engine speed.

Test cold and hot, because a pump that is marginal when cold often fails when the oil thins.

QUICK DIAGNOSIS — pump, box or restriction
  1. 1Heavy at idle, normal at speed — Low flow. Pump wear or a restricted hose.
  2. 2Heavy at all speeds — Relief valve or the box itself.
  3. 3Heavy only when hot — Pump wear or oil degradation.
  4. 4Whine with heavy steering — Pump cavitation or air in the system.
Power steering pump on a heavy truck engine with a pressure test gauge connected

Pressure and flow, measured cold and hot. That is what separates a worn pump from a worn box.

1. Pressure and flow

Connect a gauge to the pressure port and read the maximum pressure against the specification with the steering held against the stop briefly. Then read the flow at idle.

Hold the steering against the stop for no more than a few seconds, because the relief valve heats the oil quickly.

  1. Check the oil level and condition first. Low or aerated oil mimics a worn pump.
  2. Measure maximum pressure at the pump. Low pressure points at the pump or relief valve.
  3. Measure flow at idle. Low flow gives heavy steering at low speed.
  4. Repeat the test when hot. A marginal pump shows up here.

2. Restriction and the box

A collapsed or kinked pressure hose restricts flow and produces the same complaint. Check hose condition and pressure drop across the cooler if one is fitted.

Inside the box, a worn rotary valve or a scored cylinder gives heavy steering with normal pump output, and that is the case where a pump replacement solves nothing.

Test result Fault Action
Low pressure, normal flow Relief valve or pump Check valve, then pump
Normal pressure, low flow Pump wear or restriction Check hose, then pump
Both normal, steering heavy Steering box Box repair or replacement
Whine and aerated oil Air ingress Find the leak, bleed
Power steering pressure hose and cooler lines inspected for restriction on a truck

A collapsed hose restricts flow exactly like a worn pump. Check it before buying anything.

3. Bleed and verify

After any repair, bleed the system by turning the steering lock to lock with the engine idling and the reservoir topped up, then re-check the level.

Then confirm the steering effort at parking speed and on a road test. A repair that is not bled properly leaves air in the system and the complaint returns.

Never hold the steering against full lock for more than a few seconds. The relief valve heats the oil and a worn pump can fail on the spot.
Steering system being bled lock to lock with the reservoir level checked on a truck

Bleed lock to lock, then check the level. Air in the system feels exactly like a weak pump.

Questions drivers ask most

Can I test without a gauge?
Not reliably. A gauge and a flow figure cost less than one wrong pump.
Why is steering heavy only when hot?
Oil thins and a worn pump loses flow. It is a reliable early warning.
Does the pump have a filter?
Some systems have a reservoir filter. A blocked one behaves like a worn pump.
When should the oil be changed?
Follow the OEM interval, and immediately if it is burnt or contaminated.
Need steering pumps, hoses, reservoirs or steering boxes? Send the model and engine and we will confirm. Send your request

Pressure and flow specifications are model specific. Confirm them in the OEM manual.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4