banner-news1
REPAIR FAQ
Back

Sinotruk Air Suspension Height Valve Calibration

Short answer: The height valve senses the gap between the axle and the frame and adds or removes air to hold ride height. When the linkage is bent, the valve is out of adjustment or the valve itself leaks, the truck sits low at one corner, rides harshly, or cycles air continuously.

Ride height is a measured value taken at the frame or the specified reference point, and it must be set with the truck at the load the specification calls for.

Setting it at the wrong load or on an uneven floor produces a truck that sits wrong everywhere it goes.

QUICK DIAGNOSIS — valve, bag or linkage
  1. 1One corner low — Height valve linkage or the valve.
  2. 2Corner rises then falls repeatedly — Leak or a valve that will not hold.
  3. 3Whole axle low — Both valves or a supply restriction.
  4. 4Harsh ride with correct height — Damper or bag condition, not height
Air suspension height valve and its linkage mounted between axle and frame on a truck

The valve senses the gap between axle and frame. A bent linkage moves the whole setting.

1. Measure at the reference point

Measure ride height at the point and load the specification states, on a level floor. Record all four corners before changing anything, because the pattern tells you whether the fault is one valve or the whole system.

Then operate the valve by hand and watch whether the corner rises and settles.

  1. Measure all four corners at the reference load. The pattern localises the fault.
  2. Operate the valve linkage by hand. Confirm the valve responds.
  3. Check for air leaks at the bag and the lines. A leak mimics a valve fault.
  4. Adjust to specification and re-measure. Then confirm the height holds.

2. Linkage, valve and bags

The linkage is a small arm and rod, easily bent in service. A bent link changes the neutral point, so the valve holds the wrong height even when it is working.

A worn valve leaks internally and cycles air constantly, which shows as the compressor running more than usual. Bags that leak at the top or the base give the same symptoms as a valve fault.

Finding Cause Action
One corner wrong, linkage bent Linkage Straighten or replace
Height holds, air cycles Valve leak Replace the valve
Height falls slowly Bag or line leak Locate with soap solution
Both corners on one axle wrong Supply or both valves Check supply and valves
Height valve linkage inspected for bending and wear on a truck air suspension

The linkage is the part that gets bent in service. A bent link holds the wrong height even with a good valve.

3. Verify loaded and empty

After adjustment, check the height empty and loaded, and confirm the system settles without continuous cycling.

Then road test and check for harshness, because a correctly set height with a failed damper still rides badly.

Never adjust a height valve with the truck on a slope, on a jack, or at the wrong load. The valve will hold that condition as its reference.
Ride height re-measured at the reference point after height valve adjustment

Re-measure empty and loaded. A setting that only works at one load is not finished.

Questions drivers ask most

Why does one corner sit low?
Usually the height valve linkage or the valve. Check the bag for leaks too.
Can I adjust the valve myself?
Yes, if you have the specification and a level floor. Measure, do not guess.
Does ride height affect tyre wear?
Yes. Wrong height changes axle loading and alignment.
Why does the compressor run constantly?
A leaking valve or bag. Air cycling is the symptom.
Need height valves, air bags, linkage rods or dampers? Send the model and we will confirm. Send your request

Ride height values and reference loads are model specific. Confirm them in the OEM manual.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4