Short answer: Caster is the tilt of the kingpin that makes the steering self-centre, and camber is the tilt of the wheel that keeps the tyre flat on the road under load. Both change when the truck is loaded and when the suspension settles, so a measurement taken on an empty truck at the wrong ride height can be inside specification while the truck still pulls or wears tyres.
The symptoms are specific: poor self-centring and a heavy feel at speed point at caster, while one shoulder wearing and a pull to one side point at camber.
Measure with the truck in its working condition and on a level floor, and check for bent components before adjusting anything.
Load the truck as it normally runs, or at least at the load the complaint occurs with, and check ride height is correct before measuring. A sagging suspension changes both angles.
Then measure caster and camber on both wheels and compare side to side. A difference between sides is more informative than an absolute value slightly outside the range.
Worn spring bushes, a bent axle beam, a collapsed kingpin bearing and incorrect shimming at the axle all change caster and camber. So does a suspension repair that changed ride height without re-checking alignment.
On most truck axles camber is not adjustable; it is restored by replacing the worn or bent part. Caster is adjusted with shims on some axles.
| Finding | Cause | Action |
|---|---|---|
| Caster low on one side | Bent axle or worn bush | Repair the component |
| Camber out both sides equally | Worn kingpin bearing | Replace bearing |
| Angles change after a repair | Ride height changed | Re-align to the new height |
| Pull with correct angles | Brake or tyre fault | Check brakes and tyres |
After replacing a component, re-measure at the working load and road test for self-centring and pull. A repair that corrects the number but not the feel is not finished.
Then watch the tyres for the next few thousand kilometres, because wear is the final proof.
Caster and camber values at load are model specific. Confirm them in the OEM manual.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








