banner-news1
REPAIR FAQ
Back

Sinotruk Retarder Fault: Hydraulic and Eddy Current Checks

Short answer: Retarders take the load off the service brakes on long descents, and when one stops working the driver notices immediately on the first hill. Hydraulic retarders use oil and a heat exchanger, eddy current retarders use coils and a control unit, so the first question is which type the truck has.

Hydraulic faults show as low retarder oil level, a hot heat exchanger or a control valve that does not open. Eddy current faults show as an electrical or control problem with no heat at the retarder at all.

Both types share the same control inputs: a lever or a stalk, a switch and an enable condition from the engine or transmission.

QUICK DIAGNOSIS — which type of fault
  1. 1No retardation, no heat at the unit — Control signal or coil circuit.
  2. 2Retardation weak and oil low — Hydraulic fluid level or a leak.
  3. 3Works briefly then fades — Oil overheating or a heat exchanger fault.
  4. 4Works only in one gear range — Enable condition from the transmission.
Hydraulic retarder and its heat exchanger mounted behind a truck transmission

Hydraulic or eddy current decides the test. Both share the same control inputs.

1. Confirm the control signal

Before touching the retarder, confirm the control signal arrives: the lever or stalk switches, the enable condition from the transmission and the engine speed threshold.

A retarder that will not engage below a certain speed or outside a gear range is working as designed, and that is a driver training issue rather than a fault.

  1. Confirm the switch or lever output. The signal must reach the controller.
  2. Check the enable conditions. Speed, gear and temperature limits.
  3. Check the retarder oil level on hydraulic units. Low oil limits retardation.
  4. Check the heat exchanger and its coolant flow. Overheated oil fades quickly.

2. Hydraulic and eddy current specifics

On a hydraulic retarder, oil condition matters: burnt or contaminated oil loses its properties and the unit fades. The heat exchanger must reject the heat, and a blocked coolant path causes exactly the fade the driver reports.

On an eddy current retarder, check the coil circuit and the controller, and confirm the unit gets hot when energised. No heat means no magnetic braking.

Type Check Typical fault
Hydraulic Oil level and condition Low or burnt oil
Hydraulic Heat exchanger coolant flow Blocked cooler, fade
Eddy current Coil circuit and controller Open coil, no braking
Both Control signal and enables No engagement at all
Retarder oil checked and heat exchanger inspected for coolant flow on a truck

Weak retardation that fades is usually oil or coolant, not the retarder itself.

3. Verify on a descent

Test on a long descent with a load, because a retarder that works for thirty seconds and then fades will pass a short test.

Then check oil and coolant temperatures after the descent and confirm they are within the specified range.

Never treat a retarder as a substitute for the service brakes. It fades, and a driver who relies on it alone arrives at the bottom of a descent with hot, ineffective brakes.
Loaded truck descending a long grade using retarder with service brakes available

Retarder first, service brakes as the reserve. A retarder that fades leaves only the brakes.

Questions drivers ask most

Why does the retarder only work above a certain speed?
That is the enable condition. It protects the transmission and the engine.
Can a retarder be repaired in the field?
Hydraulic units sometimes, eddy current units usually by replacing the controller or coil.
What causes fade?
Overheated oil or blocked coolant flow. Check both.
Does retarder use affect fuel?
It uses engine or electrical energy, so yes, but far less than brake wear costs.
Need retarder parts, control valves, heat exchangers or coils? Send the model and we will confirm. Send your request

Retarder types and enable conditions are model specific. Confirm them in the OEM manual.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4