banner-news1
REPAIR FAQ
Back

Sinotruk Wheel Balance and Rim Runout

Short answer: A wheel that is out of balance shakes the steering or the cab at a specific speed. A rim that has runout shakes at all speeds and wears tyres unevenly. A bent rim does both, and no amount of balance weights will correct it.

Measure runout with a dial gauge before balancing, because balancing a wheel with runout wastes weights and masks the fault.

Note the speed at which vibration appears, since the pattern points at the axle involved.

QUICK DIAGNOSIS — balance or runout
  1. 1Shake at one speed band — Balance.
  2. 2Shake at all speeds — Runout or a bent rim.
  3. 3Steering shake — Front wheel balance or runout.
  4. 4Cab shake at speed — Rear wheel or driveline.
Wheel mounted on a balancing machine with weights being applied to a truck rim

Runout first, then balance. Balancing a bent rim hides nothing.

1. Measure runout

Mount a dial gauge against the rim flange and the tread, rotate the wheel and record both lateral and radial runout.

Runout beyond the specification means the rim or the tyre is defective, and balancing will not fix it.

  1. Measure radial runout at the tread. Record the value.
  2. Measure lateral runout at the flange. Both matter.
  3. Check for loose or damaged wheel nuts. Loose nuts cause vibration.
  4. Balance only after runout is acceptable. Order prevents wasted work.

2. Balance and weights

Balance both the inner and outer planes, and use the correct weight type for the rim. Adhesive weights on a dirty rim fall off and the vibration returns.

On twin wheel assemblies, balance each wheel and check the assembly for debris trapped between the wheels.

Finding Cause Action
Runout beyond limit Bent rim or tyre defect Replace the rim or tyre
Balance correct, vibration remains Driveline or bearing Check the next component
Weights falling off Dirty rim surface Clean before balancing
Vibration after a tyre change Balance not repeated Rebalance the assembly
Dial gauge measuring radial runout on a truck wheel rim

Runout is measured at the tread and the flange. Balance cannot correct it.

3. Check the whole assembly

If runout and balance are correct and vibration remains, check the bearings, the brake drum balance and the driveline before replacing more wheels.

After correction, road test at the speed where vibration appeared, and confirm it is gone.

Never fit balance weights to correct a bent rim. The rim is structurally compromised and can fail.
Road test at highway speed after wheel balancing on a heavy truck

Road test at the speed where the vibration appeared. That is the only proof.

Questions drivers ask most

Why does vibration appear only at one speed?
Balance affects a specific frequency band.
Can a bent rim be straightened?
Not safely for a heavy truck wheel.
Should tyres be balanced when fitted?
Yes, every time, and after any repair.
Does runout cause tyre wear?
Yes, uneven and rapid wear.
Need wheel rims, balance weights, studs and nuts? Send the model and we will confirm. Send your request

Runout limits and balance specifications are wheel specific. Confirm them in the OEM manual.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4