banner-news1
REPAIR FAQ
Back

Sinotruk Starter Will Not Crank: Solenoid and Brush Checks

Short answer: The starter circuit is short and simple, and the diagnosis is a voltage drop measurement rather than a guess. If the battery is good and the engine will not crank, the fault is in the cables, the solenoid or the starter motor.

Measure voltage at the starter terminal during crank attempt. If it collapses with a good battery, the cable or the connection is the fault.

A single loud click with no rotation is usually the solenoid engaging without the motor turning.

QUICK DIAGNOSIS — click or silence
  1. 1Single click, no crank — Solenoid or starter motor.
  2. 2Nothing at all, no click — Control circuit or battery.
  3. 3Cranks slowly and clicks — Battery or cable resistance.
  4. 4Cranks then stops abruptly — Worn brushes or a hot starter.
Truck starter motor and solenoid mounted on the engine with battery cables attached

Voltage at the starter terminal during a crank attempt tells you where the fault is.

1. Voltage drop, not guesswork

Measure battery voltage at rest, then at the starter terminal while a helper attempts to crank. A large difference between the two points is cable or connection resistance.

Then measure the control signal at the solenoid. No signal means the fault is upstream in the relay, the switch or the wiring.

  1. Read battery voltage at rest. Confirm the battery first.
  2. Read voltage at the starter terminal during crank. A big drop means cable resistance.
  3. Check the solenoid control signal. No signal is an upstream fault.
  4. Inspect the earth strap and its connections. A bad earth looks like a bad starter.

2. Solenoid, brushes and drive

The solenoid both engages the drive and closes the motor contact. A solenoid that clicks without closing the contact gives a single click and no rotation.

Worn brushes and a worn drive give slow or intermittent cranking, and heat makes both worse, which is why the fault often appears on a hot restart.

Symptom Cause Action
Click, no rotation Solenoid contact Replace the solenoid or starter
No click, no crank Control circuit Check relay, switch, wiring
Slow crank, hot Brushes or cables Test voltage drop, inspect brushes
Crank then stop Drive or brush wear Replace the starter
Starter motor solenoid contacts and brushes inspected on a workbench

Contacts and brushes are where starter failures show. Solenoid clicks without contact means no crank.

3. Replace and confirm

After replacement, check cranking voltage and current, then confirm the engine starts within the normal cranking time.

Then check the battery condition, because a failing battery is what kills starters by making them work longer.

Never keep cranking a slow starter. Each long crank heats the windings and can turn a repairable fault into a burnt starter.
Cranking voltage measured after starter replacement on a heavy truck

Check cranking voltage after the repair. A weak battery will otherwise kill the new starter too.

Questions drivers ask most

Why does it click but not crank?
The solenoid engages without closing the motor contact, or the motor is worn.
Can a starter be repaired?
Often yes, with brushes and solenoid parts. Compare cost with a replacement unit.
Does a bad earth cause this?
Yes. It looks exactly like a failed starter and costs nothing to check.
Why does it fail only when hot?
Heat increases resistance in brushes and windings and reduces cranking power.
Need starter motors, solenoids, brushes or battery cables? Send the engine model and we will confirm. Send your request

Starter part numbers are engine specific. Confirm them in the OEM manual.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4