Short answer: intermittent total power loss on a HOWO TX MAX is almost never the battery, and almost always resistance. A ground strap that has corroded under its lug, a main feed cable that has gone green inside the insulation, or a power switch with burnt contacts will each give you a truck that dies over a bump and starts again on the next crank. Test with a voltage drop under load, not with a voltmeter on an open circuit — a strap with one ohm of resistance reads nearly full voltage until current flows through it.
The distinction matters because a battery test tells you the battery is fine, and then the truck dies again. Voltage drop testing puts a load on the circuit and measures what the circuit actually loses, which is the number that identifies the fault.
| Component | Failure mode | Test |
|---|---|---|
| Frame ground strap | Corrosion under the lug, loose bolt, broken strands inside the crimp | Voltage drop across the strap with the starter engaged |
| Battery terminal | Oxidation, loose clamp, terminal that has been hammered on | Drop across the post-to-clamp joint while cranking |
| Main feed cable | Green corrosion inside the insulation, chafed through at a frame edge | Drop across the cable under load; flex the harness while watching |
| Power switch | Burnt contacts, heat-damaged housing | Drop across the switch contacts with everything on |
| Main fuse or fuse link | Corroded holder, hairline crack | Physical inspection and drop across the holder |
Every interruption costs more than the annoyance. A truck that loses power while the engine is running causes the ECU to reset, and repeated resets leave fault codes that point at sensors which are perfectly healthy. It also interrupts the ABS and the retarder at the moment they are needed. On trucks with an automated transmission, an intermittent main feed can interrupt a shift mid-way and leave the gearbox in an undefined state, which is the reason intermittent power faults should be fixed rather than managed.
Cable gauges, fuse ratings and ground locations are model-specific. Confirm them in the OEM wiring diagram for your chassis before modifying any electrical circuit.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








