Short answer: Scale and corrosion sit in the block, the head and the oil cooler, not in the radiator. A truck that runs hot on one cylinder or loses heat output from the cab heater is usually carrying deposits in the water jacket that no radiator flush will reach. The repair is a proper chemical clean of the whole circuit, and it has to be done before the scale becomes a cracked head.
Coolant that has never been changed, or that has been topped up for years with hard water, deposits mineral scale on the hottest surfaces in the jacket. Those surfaces are around the liners and the exhaust side of the head, which is exactly where heat has to be removed fastest.
The symptom is not a general overheating. It is one cylinder running hotter than its neighbours, a heater that blows cold, and a radiator that feels cold at the bottom while the top is hot.
Before any chemical goes in, confirm the thermostat opens, the water pump is circulating and the radiator is not air locked. A stuck thermostat produces the same top-hot bottom-cold pattern as scale, and it costs a fraction of the flush to test.
Check the heater core circuit as well. On many trucks the heater is fed from a branch that blocks first, so a cold cab heater is an early warning of a restricted jacket rather than a heater fault.
A correct clean is done in this order: drain the whole circuit including the block and the oil cooler, flush with clean water, add the specified cleaner at the specified temperature and time, drain, neutralise if the product requires it, then refill with the correct coolant mix. Skipping the neutralise step leaves an acidic residue that attacks the new coolant and the seals.
Change the thermostat and the coolant filter, if fitted, after the clean. A filter that has collected the released deposits will block within a few hundred kilometres.
| Symptom | Location | Fix |
|---|---|---|
| One hot cylinder, others normal | Block water passage | Chemical clean, verify flow |
| Cold cab heater, hot engine | Heater branch or core | Back-flush the branch |
| Radiator cold at the bottom | Core blocked or air lock | Back-flush core, bleed the system |
| Sediment in the reservoir | Whole circuit | Full clean and new coolant |
Do not use household descaler or acid on an aluminium radiator or an aluminium head. The acid removes the oxide layer that protects the aluminium and the radiator will start leaking within weeks.
Do not run a cleaning agent and then leave it in the system. Every product has a contact time, and exceeding it attacks seals and hoses.
Cleaner type, contact time and coolant specification are engine specific. Follow the OEM manual and the product instructions.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








