Short answer: Long wheelbase trucks run a two piece driveshaft with a centre support bearing and a universal joint at each end. The support bearing carries the shaft, absorbs misalignment and isolates vibration. When it wears, the shaft runs out of line and vibration appears at a specific road speed, often accompanied by a clunk on torque reversal.
Universal joints wear too, and a dry or seized joint produces a cyclic vibration that changes with load rather than with speed alone.
Both parts are inexpensive and both are frequently misdiagnosed as axle or gearbox faults because the vibration is felt through the whole chassis.
Note the road speed band where the vibration appears and whether it changes with load. A pure speed related vibration suggests balance or support, while a load related one suggests joints.
Then inspect the centre support: cracked rubber, a bearing that turns with play, or a bracket that has moved are all visible with the truck on a lift.
Universal joints must be phased so their oscillations cancel. A shaft reassembled one spline out of phase vibrates at all speeds.
Joint angles also matter: a lifted or modified suspension changes the angles and produces vibration that no balance will fix.
| Symptom | Cause | Action |
|---|---|---|
| Vibration at one speed band | Balance or support | Balance shaft, replace support |
| Clunk on torque reversal | Joint play | Replace joint |
| Vibration after a repair | Phasing or angle | Re-phase, check angles |
| Squeak at low speed | Dry joint | Grease or replace |
Grease the joints at every service with the correct grease, and replace any joint that has lost its grease or shows play. Replace the centre support as an assembly rather than only the bearing, because the rubber is usually as worn as the bearing.
Then road test through the speed band where the vibration appeared and confirm it is gone under load and on overrun.
Joint part numbers and phasing procedures are model specific. Confirm them in the OEM manual.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








