Short answer: The four circuit protection valve splits compressed air into separate circuits, front service brake, rear service brake, parking brake and auxiliary, so a failure in one does not empty the others. When one circuit loses pressure while the rest hold, the fault is usually inside the valve: a stuck piston, a failed seal or a spring that has lost tension.
The symptom is specific and easy to confirm: one circuit gauge stays at zero, or the circuit only builds when another is drained.
Testing per circuit at the valve ports is the fastest way to prove it, and it prevents replacing good valves downstream.
Connect a gauge to each delivery port and build pressure. A port that stays at zero while the supply is good has an internal fault in the valve.
Then close the circuit downstream and see whether the valve then holds. A valve that only holds against a closed circuit and not against an open one is passing internally.
The valve contains pistons and springs that close a circuit when pressure drops. Contamination, oil from the compressor or ice in winter jams them, and the circuit stays closed even when supply is restored.
Replacing the valve without fixing oil carryover or a wet system means the new valve fails the same way.
| Test result | Meaning | Action |
|---|---|---|
| One port zero, supply good | Valve internal fault | Replace or repair the valve |
| Circuit fills from another | Cross leakage | Replace the valve |
| All ports low | Supply fault | Check compressor and governor |
| Port good, circuit still dead | Downstream restriction | Check lines and components |
Before fitting a new valve, service the air dryer and drain the reservoirs, because oil and water are what destroy these valves.
After fitting, build pressure and confirm all four circuits reach their correct values, then leak test with the engine off.
Circuit pressures and valve part numbers are model specific. Confirm them in the OEM manual.
Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.
Contact Us
Whenever your truck needs repair, you don’t know how to buy the right parts?
Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.
When you have a need, you can send us your required list based on this catalog.
Obtain the complete Howo truck parts catalog PDF file and pricing.
Contact Us








