banner-news1
REPAIR FAQ
Back

Sinotruk Fuse and Relay Box Faults: Reading the Diagram

Short answer: A fuse box concentrates dozens of circuits in one place, and the failure is usually mechanical rather than electrical: a loose holder, a corroded pin, a relay that clicks without closing, or a fuse fitted in the wrong position after a roadside repair.

Start with the diagram and identify the exact fuse and relay for the failed circuit, then test the holder with a loaded circuit rather than a visual inspection.

A fuse that looks intact can be cracked internally, so a continuity test under load is the reliable check.

QUICK DIAGNOSIS — fuse, holder or relay
  1. 1Circuit dead, fuse looks fine — Cracked fuse or loose holder.
  2. 2Relay clicks, no output — Relay contact or control circuit.
  3. 3Several circuits dead together — Shared feed or earth.
  4. 4Fuse blows repeatedly — Short in the circuit, not the fuse box.
Truck fuse and relay box open with fuses and relays visible and the diagram cover removed

Read the diagram first. Most box faults are holders and relays, not fuses.

1. Identify before you test

Use the diagram to identify the fuse and relay for the failed circuit, and confirm the fuse rating matches the diagram rather than whatever was fitted last.

Then test the fuse holder with the circuit loaded, because a holder that passes a meter can still fail under current.

  1. Locate the fuse and relay on the diagram. Do not guess by position.
  2. Confirm the fuse rating against the diagram. Wrong ratings cause repeat failures.
  3. Test the holder under load. A meter alone hides resistance.
  4. Swap the relay with an identical one. Fast confirmation of relay failure.

2. Holder, relay and shared feeds

Holder contacts spread and lose tension with vibration, and the heat from a loose contact eventually melts the plastic. Brown marks around a fuse position are the sign.

Relays fail either at the coil or at the contacts, and swapping a known good relay of the same type is the fastest test.

Finding Cause Action
Fuse intact, circuit dead Holder or wiring Test under load, repair
Brown marks at a position Loose contact heat Replace the box or repair the holder
Relay clicks without output Contact failure Replace the relay
Multiple circuits dead Shared feed or earth Check the main feed and earth
Fuse holder contacts inspected for heat marks and lost tension in a truck fuse box

Brown plastic around a position means a loose contact has been heating for a long time.

3. When a fuse keeps blowing

A fuse that blows repeatedly is protecting a short, and replacing it with a larger rating is how trucks burn. Isolate the circuit and find the short.

Check any recent accessory work first, because added wiring is the most common cause of a new short.

Never fit a fuse of a higher rating than the diagram specifies. The fuse protects the wire, and the wire will melt before the fuse does.
Wiring diagram consulted beside an open truck fuse box during fault tracing

A repeat-blowing fuse means a short. More current is not the answer.

Questions drivers ask most

How do I test a fuse properly?
Continuity under load, not a visual check.
Can a relay be repaired?
Rarely worth it. Replace with the same type.
Why do several circuits fail at once?
They share a feed or an earth point.
Is a warm fuse box normal?
Slightly warm yes; hot or discoloured means a problem.
Need fuse boxes, relays, holders or wiring parts? Send the model and we will confirm. Send your request

Fuse ratings and relay positions are model specific. Confirm them in the wiring diagram.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4