banner-news1
REPAIR FAQ
Back

Sinotruk Loom Voltage Drop Testing: Finding a Chafed Feed

Short answer: Truck looms run for years through vibration, heat and water. A chafed wire, a corroded connector or a partially broken strand adds resistance that a continuity test will not reveal, because a single strand still passes current and a meter shows continuity.

Voltage drop testing under load is what exposes it: measure the difference between the source and the load while the circuit is working.

A drop of a few tenths of a volt across a connector is a fault, not a tolerance.

QUICK DIAGNOSIS — where the drop is
  1. 1Lamp dim, others normal — Resistance in that circuit.
  2. 2Works dry, fails in rain — Connector or chafed loom.
  3. 3Module resets under load — Supply drop at the module.
  4. 4Fuse warm, not blown — High resistance at the fuse holder.
Multimeter connected across a truck connector to measure voltage drop under load

Voltage drop under load. Continuity passes on a single strand that cannot carry current.

1. Load the circuit and measure

Switch the circuit on and measure voltage at the source and at the load, then subtract. The difference is the loss in the wiring and connectors between them.

Do the same for the earth return, because a bad earth produces the same symptoms as a bad feed.

  1. Identify the source and load points. Battery and component.
  2. Switch the circuit on. Measurement must be under load.
  3. Measure at both ends and subtract. The difference is the drop.
  4. Repeat on the earth return. Earth faults mimic feed faults.

2. Common locations

Connectors at the cab-to-chassis interface take water and vibration, and they are the first place to check for a circuit that fails in rain. Chafed loom sections near brackets and the steering column are the second.

A fuse holder with a loose contact heats up and adds resistance, which shows as a warm fuse that never blows.

Location Typical fault Action
Cab to chassis connector Water and corrosion Clean or replace the connector
Loom near a bracket Chafed insulation Repair the wire
Fuse holder Loose contact Replace the holder
Earth point Corrosion Clean and protect
Cab to chassis electrical connector inspected for corrosion and water ingress

This connector takes water and vibration. A circuit that fails only in rain usually lives here.

3. Repair properly

Repair a chafed wire with a proper splice and heat shrink, and add protection at the chafe point so it does not recur. Twisting and tape fails within weeks.

After repair, re-measure the drop under load and confirm the value is within specification.

Never fit a larger fuse to stop one blowing. The fuse is sized for the wire, and a larger one lets the wire overheat and start a fire.
Repaired wire with heat shrink and added loom protection on a truck harness

Splice, seal and protect. A taped repair fails as soon as the vibration returns.

Questions drivers ask most

Why does continuity pass but the circuit not work?
One strand passes current for a meter but not for a load.
What voltage drop is acceptable?
A small fraction of a volt per connection. Any significant drop is a fault.
Why does it fail only in wet weather?
Water in a connector adds resistance and corrosion.
Can I just run a new wire alongside?
Only as a temporary measure. Repair the original properly.
Need connectors, loom sections, fuse holders or electrical parts? Send the model and we will confirm. Send your request

Fuse ratings and wire sizes are model specific. Confirm them in the wiring diagram.

Need Help or Want More Detailed Maintenance Information?

Please contact our team for personalized maintenance guidance and technical support for your Sinotruk HOWO, A7, or T7 trucks. We provide professional advice and recommendations for genuine parts to help ensure the reliable operation of your fleet.

Contact Us
More Articles

Howo Sinotruk Parts & Catalog PDF

Whenever your truck needs repair, you don’t know how to buy the right parts?

Don’t worry, we have already done this job for you. We have a complete parts list catalog for different models of each truck assembly, you can choose the right catalog to download and collect according to your truck configuration.

When you have a need, you can send us your required list based on this catalog.

Obtain the complete Howo truck parts catalog PDF file and pricing.

Contact Us

Hot-Selling Replacement Parts

whatsapp-4